4CEF9C81-5A91-4B51-B011-0FA149D1249D
665973BA-5CCF-4186-8DD9-8500E2B004DF
398183BE-5B7A-4D17-9A28-F04E1020B954
4B392448-3C52-414D-B610-A48A46FE1DA7
8C893E62-B0F0-4CB3-8FD5-86C11A6759D1
1A6F50FC-C49A-4863-941F-1CF14C053F9F
4CEF9C81-5A91-4B51-B011-0FA149D1249D
665973BA-5CCF-4186-8DD9-8500E2B004DF
398183BE-5B7A-4D17-9A28-F04E1020B954
4B392448-3C52-414D-B610-A48A46FE1DA7
8C893E62-B0F0-4CB3-8FD5-86C11A6759D1
1A6F50FC-C49A-4863-941F-1CF14C053F9F

Model A “32 Style” K member for the Model A chassis with an OPEN DRIVE T5 transmission.

from $629.00

BUILT AT THE TIME OF ORDER

  • Locates in the frame using existing holes.

  • Put a Flathead Ford V8 and T5 in your Model A with NO guesswork.

  • No cutting the firewall!

  • Provisions for chatter rods.

  • Available with Pedal Assembly

  • Available with Master Cylinder Bell-crank Assembly (Uses the correct hydraulic brake pedal ratio, and allows access of the master cylinder through the floor board).

  • Use our Engine Mount Brackets for a complete installation without any brain damage!

  • Turn your stock Model A into a V8 Hot Rod in an hour when using the complete K-member kit and our Engine Mount Brackets!

  • This design is intended to be welded into the frame. Any bolting or riveting the K-member into the frame is done at the Builder’s discretion.

  • Designed for use with the open drive S-10 T5 transmission. Will accept other transmissions with similar dimensions as the S-10 T5.

CALL TO ORDER THE RIGHT HAND DRIVE VERSION

All components available separately;

K-member $839.00

Pedals $839.00

Bell-crank $629.00

Options:
Quantity:
Add To Cart

BUILT AT THE TIME OF ORDER

  • Locates in the frame using existing holes.

  • Put a Flathead Ford V8 and T5 in your Model A with NO guesswork.

  • No cutting the firewall!

  • Provisions for chatter rods.

  • Available with Pedal Assembly

  • Available with Master Cylinder Bell-crank Assembly (Uses the correct hydraulic brake pedal ratio, and allows access of the master cylinder through the floor board).

  • Use our Engine Mount Brackets for a complete installation without any brain damage!

  • Turn your stock Model A into a V8 Hot Rod in an hour when using the complete K-member kit and our Engine Mount Brackets!

  • This design is intended to be welded into the frame. Any bolting or riveting the K-member into the frame is done at the Builder’s discretion.

  • Designed for use with the open drive S-10 T5 transmission. Will accept other transmissions with similar dimensions as the S-10 T5.

CALL TO ORDER THE RIGHT HAND DRIVE VERSION

All components available separately;

K-member $839.00

Pedals $839.00

Bell-crank $629.00

BUILT AT THE TIME OF ORDER

  • Locates in the frame using existing holes.

  • Put a Flathead Ford V8 and T5 in your Model A with NO guesswork.

  • No cutting the firewall!

  • Provisions for chatter rods.

  • Available with Pedal Assembly

  • Available with Master Cylinder Bell-crank Assembly (Uses the correct hydraulic brake pedal ratio, and allows access of the master cylinder through the floor board).

  • Use our Engine Mount Brackets for a complete installation without any brain damage!

  • Turn your stock Model A into a V8 Hot Rod in an hour when using the complete K-member kit and our Engine Mount Brackets!

  • This design is intended to be welded into the frame. Any bolting or riveting the K-member into the frame is done at the Builder’s discretion.

  • Designed for use with the open drive S-10 T5 transmission. Will accept other transmissions with similar dimensions as the S-10 T5.

CALL TO ORDER THE RIGHT HAND DRIVE VERSION

All components available separately;

K-member $839.00

Pedals $839.00

Bell-crank $629.00