Model A “32 Style” K member for the Model A chassis with a 3 speed transmission.

from $629.00

BUILT AT THE TIME OF ORDER

Locates in the frame using existing holes.
Put a Flathead Ford V8 and 3-speed in your Model A with NO guesswork.
No cutting the firewall!
Uses stock Ford pedal return springs.
Provisions for chatter rods.
Available with Pedal Assembly
Available with Master Cylinder Bell-crank Assembly (Uses the correct hydraulic brake pedal ratio, and allows access of the master cylinder through the floor board).
Use our Torque Tube Spacer to run the stock rear axle and torque tube! (Sold separately)
Use our Engine Mounts for a complete installation without any brain damage! (Sold separately)
Turn your stock Model A into a V8 Hot Rod in an hour when using the complete K-member kit, Engine Mount Brackets and Torque Tube Spacer!
This design is intended to be welded into the frame. Any bolting or riveting the K-member into the frame is done at the Builder’s discretion.

CALL TO ORDER THE RIGHT HAND DRIVE VERSION

All components available separately;

K-member $839.00

Pedals $839.00

Bell-crank $629.00

Options:

3 Speed "Model A" K-member ONLY 3 Speed Pedal Assembly ONLY "Model A" Bell Crank ONLY COMPLETE KIT: K-member, Pedals & Bell Crank

Quantity:

Add To Cart

BUILT AT THE TIME OF ORDER

Locates in the frame using existing holes.
Put a Flathead Ford V8 and 3-speed in your Model A with NO guesswork.
No cutting the firewall!
Uses stock Ford pedal return springs.
Provisions for chatter rods.
Available with Pedal Assembly
Available with Master Cylinder Bell-crank Assembly (Uses the correct hydraulic brake pedal ratio, and allows access of the master cylinder through the floor board).
Use our Torque Tube Spacer to run the stock rear axle and torque tube! (Sold separately)
Use our Engine Mounts for a complete installation without any brain damage! (Sold separately)
Turn your stock Model A into a V8 Hot Rod in an hour when using the complete K-member kit, Engine Mount Brackets and Torque Tube Spacer!
This design is intended to be welded into the frame. Any bolting or riveting the K-member into the frame is done at the Builder’s discretion.

CALL TO ORDER THE RIGHT HAND DRIVE VERSION

All components available separately;

K-member $839.00

Pedals $839.00

Bell-crank $629.00

BUILT AT THE TIME OF ORDER

Locates in the frame using existing holes.
Put a Flathead Ford V8 and 3-speed in your Model A with NO guesswork.
No cutting the firewall!
Uses stock Ford pedal return springs.
Provisions for chatter rods.
Available with Pedal Assembly
Available with Master Cylinder Bell-crank Assembly (Uses the correct hydraulic brake pedal ratio, and allows access of the master cylinder through the floor board).
Use our Torque Tube Spacer to run the stock rear axle and torque tube! (Sold separately)
Use our Engine Mounts for a complete installation without any brain damage! (Sold separately)
Turn your stock Model A into a V8 Hot Rod in an hour when using the complete K-member kit, Engine Mount Brackets and Torque Tube Spacer!
This design is intended to be welded into the frame. Any bolting or riveting the K-member into the frame is done at the Builder’s discretion.

CALL TO ORDER THE RIGHT HAND DRIVE VERSION

All components available separately;

K-member $839.00

Pedals $839.00

Bell-crank $629.00